Hollis DX300x Drysuit – Mens Medium Only
The Hollis DX-300x was designed by technical divers, for technical divers. It is manoeuvrable and comfortable whilst ensuring long lasting with wear. Specifically designed with Cordura material for the rugged and strong look and feel.
The suit is constructed from a heavy duty trilaminate material that has a mass of 700g/sqm for extra strength and increased seam integrity. The outer layer is a tight weave Cordura Ripstop fabric, designed to provide high puncture and abrasion resistance that also helps protect the material from velcro piling and damage. The inner fabric is a silk weave polyester to provide the perfect finish for comfort and softness with easy donning and doffing. The two fabrics sandwich a 390g/sqm Buytl layer that is made up of approximately 12 layers to give a long life waterproof layer that incorporates superb chemical and ozone resistance.
The front entry diagonal zip is a YKK flexible composite zip that is much more flexible than a traditional brass zip and has a flatter profile. The torso also incorporates a telescopic body that prevents restricted upper body by folding and securing a small excess of material beneath an outer flap that is held in place by an elasticated crotch strap.
A Si-Tech silicone neck and wrist seal system is fitted as standard to provide a much more comfortable and flexible seal against the skin. The silicone seals can be replaced in minutes, allowing a spare seal to be fitted between dives on a boat in a wet environment with the need for adhesives.
Buoyancy is controlled via the swivelling Si-Tech inflator valve on the chest and the Si-Tech automatic shoulder dump that can be adjusted to your desired sensitivity. The arms are fitted with a loop of 3M reflective material to help with locating in low light conditions. The DX-300x has two thigh pockets, the right leg is a large zippered pocket whilst the left is a Velcro secured pocket, both of which feature D-rings to secure ancillary equipment.
The knees are coated with a second layer of the suit material to provide additional abrasion protection in this high wear area. 5mm thick neoprene socks provide plenty of warmth and allow for your choice of boot style to be fitted over the top of the sock. The suit is fitted with internal brace and is supplied with an inflator hose, zippered hood and carry bag.
- Heavy duty tight weave Cordura Ripstop trilaminate
- Patented BIAS cut
- Telescopic torso
- YKK composite low profile front entry zip
- Fitted with SiTech Neck and wrist system with silicon seals as standard
- One large zipped pocket
- One large velcro pocket
- 3M reflective safety stripe on lower arms
- Double thickness kneepads
- 5mm neoprene socks
- Fitted braces
- The suit is supplied with a Hollis Zippered Hood and Hollis Drysuit Carry Bag